Natural Cures Not Medicine
Image: inhabitat.com |
grid community. Many techniques such as
I've compiled as much information about how one would go about building a DIY fog into water collector here in this article. Technical data and know how on this subject is fairly scarce so if you plan on building one at home, some improvisation and experimentation will be needed. We have compiled all the basic steps you will need to take to build one of these water harvesting 'fog traps' for less than a few hundred dollars. An efficient fog collector could produce more than 3 liters of water per square yard of surface area per day in an area with a lot of fog and decent wind!
You will need some screen: usually fine-mesh nylon or polypropylene netting shade cloth. According to research the best cloth to use would be nylon shade cloth or polypropylene netting that provides 30-40% coverage similar to this commonly available greenhouse shade cloth, double layered.
From oas.org
"After testing the efficiency of various mesh densities, the fog collectors used at El Tofo were equipped with netting providing 35% coverage, mounted in double layers. This proportion of polypropylene-surface-to-opening extracts about 30% of the water from the fog passing through the nets."Next you will have to build posts or a tent like structure to suspend the screen over. Remember that you want the screen to be fairly taut for highest efficiency. You can use a simple technique that would be similar to making a fence post, then suspend the screen between the posts. You can also make a hoop style structure out of piping or plastic PVC, similar to what you see in the picture posted here:
From oas.org
"Full-scale fog collectors are simple, flat, rectangular nets of nylon supported by a post at either end and arranged perpendicular to the direction of the prevailing wind."Finally, you will have to build some kind of trough or gutter at the bottom of the netting to collect the water that has been captured from the fog and then drains into a storage container. The trough will have to be shaped as too take advantage of gravity to collect the water into the storage tank.
From oas.org
Here is an example of a trough or gutter design that can be used |
Make sure to secure your fog collector down if needed. If you used the fence post style structure further support may not be needed, but with the PVC style you will need to.
Here is a time-lapse video showing the fog condensing and turning into water:
Example of a simple water storage setup |
This 'fog trapping' is being implemented in many third world countries where water is scarce, but could be used by anyone seeking to have a backup water supply in case of emergencies or to get off the water grid.
No comments:
Post a Comment
How do you feel about this?